Speed And Feed Calculator for Professional CNC Programmers and Machinists

What's new in this update:

• Fixed the problem with the new tools being added without any information about the tool.
• Made the labels for millimeters and inches consistent in the Circular Interpolation dialog.
• Now, when you delete a tool or cut that is currently loaded, we will automatically "unload" it.
• We have added a new Appnium UI testing framework that tests the "tool create" and "delete" functions.

In the previous update:

• Added the Cut Cloud Status icon to the toolbar area.
  Log-in and Log-out are now handled through that.
• Added login check before uploading the Machine Profile.

HSMAdvisor Installer Size:4.95 MB Zipped installer Size:4.92 MB

What's new in this update:

• Added the Cut Cloud Status icon to the toolbar area.
  Log-in and Log-out are now handled through that.
• Added login check before uploading the Machine Profile.

In the previous update:

• Re-calculated chip loads for all metal materials according to the new model.
  From now on materials will have independent chip loads for HSS and Carbide tools.
• Remove critical RPM from milling operations.
• Fix the deletion of a synced tool in the cloud database.
• Fix inconsistent English language tooltip spacing.
• Improve Tool Database recovery.
• Add Macor Ceramic Glass material.
• Fix a typo in the Inch Taps table (2.6.1).
• Add the Drill Breakthrough Amount to the Calculation printout report (2.6.1).
• Fix zero Turning Feed Rate (2.6.1).
• Fix S&F Overrides when loading tools from the Select Tool/Cut dialog (2.6.2)
• Set the High Feed Mill default lead angle to 15 degrees (2.6.3)

HSMAdvisor Installer Size:4.89 MB Zipped installer Size:4.87 MB

Please Read. Major Update!

In this update, I recalculated chip load values for all metal materials from group 1 to group 22.

While chip loads for most materials have not changed by more than 10%, there were those that got either reduced or increased by up to 30%.

I am confident these changes will make your machining outcomes even better than before, but please make sure to keep an eye on your results. Especially in cases where you have saved Tools with Feed overrides over 100%.

What's new in this update:

• Re-calculated chip loads for all metal materials according to the new model.
  From now on materials will have independent chip loads for HSS and Carbide tools.
• Remove critical RPM from milling operations.
• Fix the deletion of a synced tool in the cloud database.
• Fix inconsistent English language tooltip spacing.
• Improve Tool Database recovery.
• Add Macor Ceramic Glass material.
• Fix a typo in the Inch Taps table (2.6.1).
• Add the Drill Breakthrough Amount to the Calculation printout report (2.6.1).
• Fix zero Turning Feed Rate (2.6.1).
• Fix S&F Overrides when loading tools from the Select Tool/Cut dialog (2.6.2)
• Set the High Feed Mill default lead angle to 15 degrees (2.6.3)

In the previous update:

• Added the Portuguese language
  Thanks to the fine gentleman TribeJoint - www.instagram.com/tribejoint/ for providing the translation!
• Fixed Translation uploading issues.
• Minor fixes that will improve the accuracy of chip load calculations.

HSMAdvisor Installer Size:5.01 MB Zipped installer Size:4.98 MB

What's new in this update:

• Added the Portuguese language
  Thanks to the fine gentleman TribeJoint - www.instagram.com/tribejoint/ for providing the translation!
• Fixed Translation uploading issues.
• Minor fixes that will improve the accuracy of chip load calculations.

In the previous update:

• Added decimal places to MRR display.
• Added  A286 to ferrous super alloys section.

HSMAdvisor Installer Size:4.97 MB ZIPped installer Size:4.94 MB

What's new in this update:

• Added decimal places to MRR display.
• Added  A286 to ferrous super alloys section.

In the previous update:

• Fixed SSL/TSL connection issues (v2.5.10)
• Improvements in Cut Cloud functionality. (v2.5.7)
• Closing the Loading Screen now closes the app (v2.5.7)
• Improved feed rates for carbide tools on soft plastics.
• Added "Debug" log in the settings.
  If you have any issues, please make sure to send me the debug text.
• New Materials added:
  PTFE, Teflon
  AISI 52100 Annealed (40 RC)
  AISI 52100 (60-65 RC)
  AISI 9310 Steel, AMS 6265, AMS 6267  (Annealed 245 HB)

HSMAdvisor Installer Size:4.93 MB ZIPped installer Size:4.9 MB